"Precision doesn’t start with the coating—it starts with what’s beneath."

In high-stakes manufacturing, quality control begins at the surface. Slag, burrs, and oxidation left after laser cutting not only compromise part function but threaten downstream processes like coating, sealing, or welding.

Why Post-Laser Deburring Is Mission Critical

Sharp burrs aren't just edges—they're defects waiting to fail.

Problems left unaddressed:

• Edge burrs tear gloves, injure hands, and cause fitment issues

• Slag remnants disrupt sealing and coating uniformity

• Oxide layers reduce surface conductivity and adhesion

If your parts leave the laser table and go straight to coating—you’re missing a critical layer of preparation.

Enter SG1030-NG+JS: JONSEN’s Two-Stage Precision Cleaning System

This isn’t just a deburring machine—it’s a complete finishing prep solution built for performance.

Integrated Modules:

• Narrow Abrasive Belt Head:

  • Focuses pressure on edge contours only

  • Efficient slag and burr removal

  • Minimal surface abrasion = longer belt life

• Wide Abrasive Belt Head:

  • Sweeps full part face

  • Removes residual oxide and micro-burrs

  • Creates uniform surface for coating or assembly

Verified Performance:

• Working width: up to 1000mm

• Part thickness: 1mm–70mm

• Conveyor speed: 1–5m/min

It’s not about just cleaning metal—it’s about preparing it to perform.

Use Case A: Aerospace Supplier Eliminates Post-Cut Rework

An aerospace OEM was experiencing high rework rates due to poor coating adhesion on precision air-cut brackets. Manual grinding introduced inconsistencies, while oxide residue compromised conductivity.

After integrating the SG1030-NG+JS:

• Burr-free, oxide-free surfaces in one pass

• Adhesion test pass rate jumped from 76% to 97%

• Rework time cut by 65%

• Dust-free operation reduced shop floor hazards

"We no longer have to babysit the finishing stage. The parts speak for themselves."

Built for OEM-Grade Demands

Trusted by manufacturers across:

• Aerospace & Rail

• Automotive Tier 1 Suppliers

• Precision Sheet Metal Shops

• Industrial OEMs

Whether you're cutting mild steel, stainless, or aluminum—the SG1030-NG+JS modular system adapts to your material, size, and finish tolerance.

Still manually reworking laser-cut parts? It's time to automate where precision matters most.

Let’s Get Technical – Book Your Live Test

Want to see the SG1030-NG+JS on your actual parts? We offer free sample processing and full configuration support.

Contact our team for demo bookings, configuration specs, and pricing.